ADG5412FBRUZ-RL7

Analog Devices
584-ADG5412FBRUZ-RL7
ADG5412FBRUZ-RL7

Fabricante:

Descripción:
Circuitos integrados de interruptor analógico -55V Fault Protected, 20V, 15V, +12V

Hoja de datos:
Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.
Más información
Conozca más sobre Analog Devices ADG5412FBRUZ-RL7

En existencias: 436

Existencias:
436 Se puede enviar inmediatamente
Plazo de entrega de fábrica:
10 Semanas Tiempo estimado de producción de fábrica para cantidades superiores a las que se muestran.
Mínimo: 1   Múltiples: 1
Precio unitario:
$-.--
Precio ext.:
$-.--
Est. Tarifa:
Empaque:
Envase tipo carrete completo (pedir en múltiplos de 1000)

Precio (USD)

Cantidad Precio unitario
Precio ext.
Cinta cortada / MouseReel™ †
$13.37 $13.37
$10.53 $105.30
$9.83 $245.75
$9.29 $929.00
$9.11 $4,555.00
Envase tipo carrete completo (pedir en múltiplos de 1000)
$8.26 $8,260.00
† $7.00 Se agregará y calculará la tarifa de MouseReel™ en su carrito de compras. Ningún artículo de MouseReel™ se puede cancelar ni devolver. ↩

Embalaje alternativo

N.º de artículo del Fabricante:
ADG5412FBRUZ
Embalaje:
Tube
Disponibilidad:
En existencias
Precio:
$13.37
Mín.:
1

Producto similar

Analog Devices ADG5412FBRUZ
Analog Devices
Circuitos integrados de interruptor analógico -55V Fault Protected, 20V, 15V, +12V
Comparar con la parte actual

Atributo del producto Valor de atributo Seleccionar atributo
Analog Devices Inc.
Categoría de producto: Circuitos integrados de interruptor analógico
RoHS:  
SMD/SMT
TSSOP-16
4 Channel
4 x SPST
11.2 Ohms
9 V
40 V
+/- 9 V
+/- 22 V
495 ns
510 ns
- 40 C
+ 125 C
ADG5412F
Reel
Cut Tape
MouseReel
Marca: Analog Devices
País de ensamblaje: Not Available
País de difusión: Not Available
País de origen: PH
Dp - Disipación de potencia : 1 mW
Tipo de producto: Analog Switch ICs
Cantidad de empaque de fábrica: 1000
Subcategoría: Switch ICs
Corriente de suministro - Máx.: 1.2 mA
Tipo de suministro: Single Supply, Dual Supply
Interruptor de corriente continua: 83 mA
Peso de la unidad: 173 mg
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

Hoja de datos

PCN

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

Switches & Multiplexers

Analog Devices Switches & Multiplexers offer a comprehensive portfolio of switches and multiplexers covering single to multiple switch elements. These switch elements come with various signal ranges in a variety of packages to best suit application needs. The ADI switches and multiplexers are used in a wide and growing range of applications from industrial and instrumentation to medical, consumer, communications, and automotive systems.

ADG5412F/ADG5413F Quad SPST Switches

Analog Devices ADG5412F/ADG5413F Fault Protection and Detection Quad SPST Switches include four independently controlled single-pole/single-throw (SPST) switches for overvoltage protection up to −55V and +55V. ADG5412F features four switches that turn on with Logic 1 inputs. ADG5413F features two switches that turn on and two switches that turn off with Logic 1 inputs. 

Fault-Protected Switches & Multiplexers

Analog Devices Fault-Protected Switches & Multiplexers provide protection against overvoltage, power off, high ESD, and latch-up. These Analog Devices switches and multiplexers, optimized for robustness and protection, and offer high performance in industry-leading small packages. The devices protect themselves and are typically used at the edges of the PCB where overvoltage issues are likely to occur.

Analog Devices ADG5412F/ADG5412BF Quad SPST Switches

Analog Devices ADG5412F/ADG5412BF Fault Protection Quad SPST Switches include four independently controlled single-pole/single-throw (SPST) switches for overvoltage protection up to −55V and +55V. ADG5412F/ADG5412BF features four switches that turn on with Logic 1 inputs. When powered on, each switch conducts equally well in both directions, and each switch has an input signal range that extends to the supplies. The digital inputs are compatible with 3V logic inputs over the full operating supply range. When power supplies are absent, the switch remains in the off condition, and the switch inputs are high impedance. Under normal operating conditions, if the analog input signal levels on any Sx pin exceed VDD or VSS by a threshold voltage, VT, the switch turns off. Input signal levels up to +55V or −55V relative to ground are blocked, in both the powered and unpowered condition. The low on resistance of 10Ω of the ADG5412F/ADG5412BF switches, combined with on-resistance flatness over a significant portion of the signal range make it an ideal solution for data acquisition and gain switching applications where excellent linearity and low distortion are critical.
Learn More

Analog Switches & Multiplexers

Analog Devices Analog Switches and Multiplexers offer a comprehensive range of devices covering single to multiple switch elements. These switches and multiplexers come with various signal ranges in a variety of packages to suit different application needs. The analog switches and multiplexers are used in a wide and growing range of applications from industrial and instrumentation to medical, consumer, communications, and automotive systems.

Switches & Multiplexers ADI SLP


Se ha producido un error inesperado.


¿Tiene alguna pregunta? Visite el Centro de ayuda.
Si tiene preguntas sobre un pedido específico, inicie sesión en su cuenta.

Si tiene más problemas, comuníquese con nosotros al 800-346-6873 o envíe un correo electrónico a help@mouser.com.