XR3160ECU-F

MaxLinear
701-XR3160ECU-F
XR3160ECU-F

Fabricante:

Descripción:
Interfaz - Especializado Transceiver w/ 15KV ESD Protect

Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

En existencias: 98

Existencias:
98 Se puede enviar inmediatamente
Plazo de entrega de fábrica:
2 Semanas Tiempo estimado de producción de fábrica para cantidades superiores a las que se muestran.
Mínimo: 1   Múltiples: 1
Precio unitario:
$-.--
Precio ext.:
$-.--
Est. Tarifa:

Precio (USD)

Cantidad Precio unitario
Precio ext.
$9.79 $9.79
$9.17 $91.70
$7.99 $199.75
$7.69 $769.00
$7.39 $1,950.96
$6.00 $3,168.00
$5.87 $6,198.72
2,508 Presupuesto

Atributo del producto Valor de atributo Seleccionar atributo
MaxLinear
Categoría de producto: Interfaz - Especializado
RoHS:  
Multiprotocol Transceiver
RS-232, RS-422, RS-485
5.5 V
3 V
2.5 mA
0 C
+ 70 C
SMD/SMT
SSOP-20
+/-15 kV
Marca: MaxLinear
País de ensamblaje: Not Available
País de difusión: CN
País de origen: CN
Velocidad de transmisión de datos: 1 Mb/s, 20 Mb/s
Dúplex: Half/Full Duplex
Función: Transceiver
Sensibles a la humedad: Yes
Voltaje de alimentación operativo: 3 V to 5.5 V
Tipo de salida: Differential
Empaquetado: Tube
Dp - Disipación de potencia : 662 mW
Producto: Transceivers
Tipo de producto: Interface - Specialized
Serie: XR3160E
Apagado: With Shutdown
Cantidad de empaque de fábrica: 66
Subcategoría: Interface ICs
Peso de la unidad: 453.600 mg
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

Esta funcionalidad requiere que JavaScript esté habilitado.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
KRHTS:
8542311000
TARIC:
8542319000
MXHTS:
8542399999
ECCN:
EAR99

XR3160E RS-232/RS-485/RS-422 Transceivers

MaxLinear XR3160E RS-232/RS-485/RS-422 Transceivers are advanced multiprotocol transceivers with 15KV ESD protection. All transmitter outputs and receiver inputs provide robust electrostatic discharge (ESD) protection to ±15kV IEC 61000-4-2 Airgap, ±15kV Human Body Model (HBM) and ±8kV IEC 61000-4-2 Contact. Full fail-safe protection is included on each receiver output to avoid system lockup, oscillation, or indeterminate states by defaulting to logic-high output level when the inputs are open, shorted, or terminated but undriven. XR3160E high speed drivers operate up to 20Mbps in RS-485/422 modes, and up to 1Mbps in RS-232 mode. The RS-232 receiver inputs include a 5kΩ pull-down to ground when in RS-232 mode. The RS-485/422 receiver inputs are high impedance (>96kΩ), allowing up to 256 devices on a single communication bus (1/8th unit load). Operating from a single power supply from 3V to 5.5V, the shutdown mode consumes less than 1μA in low power standby operation with RS-232 receivers enabled. MaxLinear drivers can be slew limited to 250kbps in any mode to minimize electromagnetic interference (EMI) by setting the dedicated SLEW pin low.

XR3160E RS-232/RS-485/RS-422 Transceivers & Eval Board

Exar XR3160E RS-232/RS-485/RS-422 Transceivers are advanced multiprotocol transceivers with 15KV ESD protection. All transmitter outputs and receiver inputs provide robust electrostatic discharge (ESD) protection to ±15kV IEC 61000-4-2 Airgap, ±15kV Human Body Model (HBM) and ±8kV IEC 61000-4-2 Contact. Full fail-safe protection is included on each receiver output to avoid system lockup, oscillation, or indeterminate states by defaulting to logic-high output level when the inputs are open, shorted, or terminated but undriven. XR3160E's high speed drivers operate up to 20Mbps in RS-485/422 modes, and up to 1Mbps in RS-232 mode. The RS-232 receiver inputs include a 5kΩ pull-down to ground when in RS-232 mode. The RS-485/422 receiver inputs are high impedance (>96kΩ), allowing up to 256 devices on a single communication bus (1/8th unit load). Operating from a single power supply from 3V to 5.5V, the shutdown mode consumes less than 1μA in low power standby operation with RS-232 receivers enabled. All drivers can be slew limited to 250kbps in any mode to minimize electromagnetic interference (EMI) by setting the dedicated SLEW pin low.

Exar offers an evaluation board for the XR3160E RS-232/RS-485/RS-422 Transceivers.
Learn More