UCC2913D

Texas Instruments
595-UCC2913D
UCC2913D

Fabricante:

Descripción:
Controladores de voltaje intercambiables en caliente Neg Floating Single Industral Temp. A 59 A 595-UCC2913DTR

Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

En existencias: 146

Existencias:
146 Se puede enviar inmediatamente
Plazo de entrega de fábrica:
12 Semanas Tiempo estimado de producción de fábrica para cantidades superiores a las que se muestran.
Mínimo: 1   Múltiples: 1
Precio unitario:
$-.--
Precio ext.:
$-.--
Est. Tarifa:

Precio (USD)

Cantidad Precio unitario
Precio ext.
$8.93 $8.93
$6.24 $62.40
$5.95 $148.75
$5.06 $379.50
$4.22 $1,266.00
$4.03 $4,231.50
$3.98 $11,940.00

Atributo del producto Valor de atributo Seleccionar atributo
Texas Instruments
Categoría de producto: Controladores de voltaje intercambiables en caliente
RoHS:  
Controllers & Switches
Programmable
10.5 V
8.5 V
1 Channel
1 mA
- 40 C
+ 85 C
SMD/SMT
SOIC-8
Tube
Yes
Marca: Texas Instruments
País de ensamblaje: MX
País de difusión: US
País de origen: MX
Tensión de entrada / alimentación - Máx.: - 10.5 V
Tensión de entrada / alimentación - Mín.: - 9.999 kV
Tipo de producto: Hot Swap Voltage Controllers
Serie: UCC2913
Cantidad de empaque de fábrica: 75
Subcategoría: PMIC - Power Management ICs
Peso de la unidad: 72.600 mg
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

Esta funcionalidad requiere que JavaScript esté habilitado.

CNHTS:
8542319090
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
TARIC:
8542399000
MXHTS:
85423999
ECCN:
EAR99

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.